Relay vs Sparks
2025-06-30
Customized Relay vs Sparks Problem
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a switch. KEBO understands the importance of relays design towards product quality.
From over 25 years of stabilizer manufacturing experience, we understand how different sparks will cause damage to PCB and even burnt transformer.
That is why we constantly improve structural design and function of our relays on each PCB board.
Therefore, we build a relay laboratory as well as workshop so that we can monitor each step of the relay production from sample testing till final production.
We guarantee each step is strictly following ISO procedure.
Next
Next
Related Blog
Related knowledge of voltage stabilizer
A voltage stabilizer is a device that stabilizes the output voltage. It is composed of a voltage regulating circuit, a control circuit, and a servo motor. When the input voltage or load changes, the control circuit samples, compares, and amplifies, and then drives the servo motor to rotate to change the position of the carbon brush of the voltage regulator. The coil turns ratio is automatically adjusted to keep the output voltage stable.
2025-05-15
How to solve the problem of low voltage at home?
With the development of society, the use of electricity has become more frequent and more diverse, from the original household electricity only for lighting, to the current air conditioning, cooking, computers, mobile phones and so on. However, electricity has also changed steadily with use. In some areas, the voltage is low, which causes the lights to be unable to illuminate, the air conditioner cannot be cooled, the computer often freezes and restarts, and the mobile phone cannot be charged. A series of low voltage problems; High, resulting in frequent burning of electrical components or electrical equipment. Therefore, the best way to solve these problems is to install a voltage stabilizer for your own power grid. When the grid voltage is unstable or the load changes, the voltage stabilizer will automatically sample the voltage stabilizer control circuit to send a signal to drive the servo motor, adjust the position of the stabilizer auto-voltage regulator carbon brush, and adjust the output voltage of the stabilizer to the rated value Value and reach a steady state.
2025-05-15
Why can't the input terminal of the Voltage Stabilizer be equipped with a leakage protector?
When using a voltage stabilizer, never use a leakage protector at the input of the regulator. This is a major principle used by automatic voltage regulators.
2025-05-15
Power Supply Manufacturer