Blog
Blog
Heavy duty components ，Built in digital countdown system
Blog
2025-05-15
Related knowledge of voltage stabilizer
A voltage stabilizer is a device that stabilizes the output voltage. It is composed of a voltage regulating circuit, a control circuit, and a servo motor. When the input voltage or load changes, the control circuit samples, compares, and amplifies, and then drives the servo motor to rotate to change the position of the carbon brush of the voltage regulator. The coil turns ratio is automatically adjusted to keep the output voltage stable.
2025-05-15
How to solve the problem of low voltage at home?
With the development of society, the use of electricity has become more frequent and more diverse, from the original household electricity only for lighting, to the current air conditioning, cooking, computers, mobile phones and so on. However, electricity has also changed steadily with use. In some areas, the voltage is low, which causes the lights to be unable to illuminate, the air conditioner cannot be cooled, the computer often freezes and restarts, and the mobile phone cannot be charged. A series of low voltage problems; High, resulting in frequent burning of electrical components or electrical equipment. Therefore, the best way to solve these problems is to install a voltage stabilizer for your own power grid. When the grid voltage is unstable or the load changes, the voltage stabilizer will automatically sample the voltage stabilizer control circuit to send a signal to drive the servo motor, adjust the position of the stabilizer auto-voltage regulator carbon brush, and adjust the output voltage of the stabilizer to the rated value Value and reach a steady state.
2025-05-15
Why can't the input terminal of the Voltage Stabilizer be equipped with a leakage protector?
When using a voltage stabilizer, never use a leakage protector at the input of the regulator. This is a major principle used by automatic voltage regulators.
2025-05-28
The voltage stabilizer shows overvoltage or undervoltage how to deal with?
Usually the power distribution voltage is not 220V, 380V, the low three-phase power is more than 200 volts, the high one is 400 volts, and the single-phase power is the same. The high and low voltages sometimes differ greatly, so before we buy the voltage stabilizer, we need to have a measurement on the electrical sample used. The voltage stabilizer manufacturers will set the minimum and maximum voltage value of the user of the voltage stabilizer according to the electrical sample, and then obtain the fluctuation range value of it. Then according to the obtained the output voltage fluctuation value indicates the most suitable voltage stabilization range of the voltage stabilizer, and generally, when choosing the voltage stabilization, the voltage stabilization range of the voltage stabilization range is wider than the actual range. Regardless of the regulator produced by the regulator manufacturer, no matter what type of regulator, there will be some voltage stabilization range. The so-called voltage stabilization range is based on the normal voltage value as a starting point and can accept the highest voltage. The ratio of the voltage to the lowest voltage. If it exceeds this range, it is overvoltage, and if it is below this range, it is undervoltage. So what should I do if the output voltage of the regulator is too high or too low? Can we adjust ourselves?
2025-05-28
What role does an automatic voltage regulator play in household electricity?
Most of people may not know more about the automatic voltage regulator, but it plays an important role in our home.
2025-05-28
What are the differences between regulated power supply and switching power supply?
There are many types of regulated power supplies. Series-type stabilized power supplies are composed of power transformers, rectifier elements, filter capacitors, adjustment elements (adjustment tubes or three-ray regulators, etc.), reference voltage, sampling network, comparison expansion, and overload or short circuit protection and other combinations. Because the series-type stabilized power supply is a linear stabilized circuit, and the regulator tube is stable. Its disadvantages are high power consumption, low efficiency and small scale of fluctuations in the grid. Generally, the series regulated power supply allows the grid fluctuation scale to be 220&±22V. In order to reduce power consumption and improve efficiency, a switch-type regulated power supply is introduced.
Power Supply Manufacturer