how to change a farmall from a 6 volt to a 12 volt | ehow
After disconnecting the nut for fastening C-, unplug the negative battery cable from the negative terminalTerminal clip.Do the same for the positive line, but in order to avoid vibration, be sure to remove the negative line first.Unlock the wing nut that holds the battery in the battery mounting cage.Remove the 6-volt battery.Grind the battery bracket off the tractor frame.Weld the 12-The Volt battery is installed in its position.Place the 12-Install the volt battery on and fix the cage around.
By unscrewing the nut on the generator terminal, remove the two positive lines from the generator.Remove the generator from the generator bracket.Grind the generator bracket from the tractor frame and weld the AC generator/regulator bracket in the same position.Unscrew the bolts and secure the wires from the coil to the regulator.Remove the regulator from the bracket.Wear off the bracket on the tractor.
Connect the wire running from the coil to 12-Volt generator terminals with nuts.Running the main line from the battery to the AC generator.
Unscrew the light case and remove 6-The Volt bulb is pushed in and screwed into one-Rotate clockwise.Unscrew the screws that connect the lighting assembly to the lighting housing and use 12-V components.Put in the 12-Volt lamp and replacement lamp cover.Replace the 6-12 volt fuseThe hand of the Volt fuse.
Connect the negative battery cable to 12-Negative terminal of Volt battery.