Sub-station

what is a regulator how to tell |

by:KEBO      2019-10-12
The propane regulator controls the flow of gas and reduces the pressure of the equipment from the tank to the gas system.They act as a safety barrier between the high pressure of the tank and the appliance, and also act as a control mechanism for the flow and distribution of propane gases.These regulators have different types depending on the application and the purpose they will serve.Telling different places and choosing the right regulator is a job that any homeowner can handle with minimal problems.
Check the regulator to determine if it is a high voltage regulator.The high-pressure regulator is marked in red and is usually used in a two-stage regulator system for high-voltage modulation.They vary in size and design, and the outlet pressure gauge has a side outlet of 1/4.They can provide power up to 100 psi, and can also be used independently where there are demanding appliances and equipment.
Determine if the propane regulator is a two-stage regulator.This regulator consists of a combined system, with the first and second level regulators connected to one unit.Check if the smaller Level 1 regulator is connected to the larger level 2 regulator.They are mounted on storage tanks and provide stable pressure.They are only used for propane steam service and for residential propane gas installations.
Check the regulator to determine if it is an adjustable high voltage regulator.The regulator will also be marked in red, similar to the red color described in step 1, but can also be adjusted, usually used to provide the appropriate pressure to the device.They have an adjustable function in 0-20 psi, 0-30 psi and 0-60 psi and built-in output pressure regulation control on the side of the regulator, which will make it different from the high pressure regulator in step 1.They are usually attached to the propane torch, heater and storage tank that refuels the asphalt mixer.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...