Sub-station

solar power inverter for home Solar Power Shingles

by:KEBO      2019-11-16
The sun beats on your roof all day, and like many homeowners, you may want to take advantage of the fact by collecting solar energy used by your home.For many, however, a large array of solar cells may be a thorn in the eye.Solar tile is an increasingly viable option.These are unobtrusive additions to your existing roof that capture solar energy and generate electricity.Solar tiles are not always cost-effective.But the new technology may soon make homeowners around the world more viable.(References 1, 3, 5) the solar tile is made from other semiconductor materials such as amorphous silicon or tellur cadmium.This material is applied in a very thin layer, only a few microns thick, in a design called "thin"Solar cells.Because the photovoltaic material is very thin, it can take the form of a roof tile.Solar tiles are available in a variety of colors, mixed with traditional asphalt tiles, and if you are a homeowner, worry about the appearance of the solar panels at home, it's going to be an elegant and unobtrusive American media report.S.Energy Department Office of solar technology.The solar tile is designed to be installed in the position and side of the traditional tile.The Department of Energy recommends that you have solar professionals install them and they will guide them to maximize exposure to the sun.In order to produce power that can be used in the home, additional equipment such as power inverter is required for the shingles tile.While the initial cost of installing a solar tile may be high, you can use the federal tax credit provided by the US to help offset most of the costs.As of the beginning of 2011, commercial solar panels tend to be less efficient and cost-effective than conventional solar panels.A 2001 study published in the Journal of Solar Engineering found that thinThin-film solar cells cost about $11 per watt for power generation, while traditional solar panels cost about $8.50 per watt.This is mainly due to unequal performance: the average conversion rate of traditional crystal cells is about 10%, while the conversion rate of thin film cells is about 6%.Research continues at a fast pace, in thin-Experts from the Department of Energy's National Renewable Energy Laboratory have pointed out that film technology may even eliminate the differences between solar and crystal panels.Researchers created a new record in 2008.A thin film solar cell with an efficiency of about 20%, almost matching the highest performance limit of the crystal cell.In 2010, a new wooden tile was released, which is more efficient than 10% and can be installed in about 10 hours.This is a significant increase in installation efficiency and labor costs.This new type of wooden tile is expected to be widely used at some point in 2011.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...