Sub-station

motor inverter dc to ac How to make a Homemade Wind Generator

by:KEBO      2019-10-22
Making wind turbines is much simpler than people think.The first thing you need to pay attention to is that the magnets generate electricity.That\'s right!The magnet can generate electricity by passing through the conductor inside the magnetic field of the magnet.This is the law of induction that Michael Faraday discovered.There are only magnets and copper wires in the windmill.The magnet is placed on the back of the windmill propeller, passing through a circle of copper wire, and it is this mechanical device that generates electricity.So when the wind comes to move the propeller, it also rotates the magnet, allowing the current to sense to the copper line.The magnetic field strength and quantity of the copper wire surface area exposed to the magnetic field is proportional to the amount of electricity the wind turbine will emit.The speed of the propeller is also proportional to the electrical output.
An easy way to make a generator is to find a DC motor.One thing you should know is that all DC motors are essentially generators.When the shaft of the motor is mechanically rotated, there will be an electrical output.The positive and negative poles of the motor are then connected to the positive and negative poles of the charging controller.The charging controller adjusts to the power of your battery pack so that it does not overcharge the battery.There is no charging controller and the battery may melt or catch fire when the wind comes.Therefore, the charging controller is an essential safety precaution.Don't forget to attach the ground wire to a large piece of metal.It's a good idea to put your generator on a metal rod so you can later connect the ground wire to it.
The output positive and negative terminals of the charging controller are then connected to the positive and negative terminals of the battery pack.Most battery packs for off-grid systems are usually made up of several 12 Volt car batteries.The more batteries you have, the more electricity you can store.The next step after the battery pack is the inverter.
The inverter then converts DC power into AC power in order to power the standard plug in the electronic device.The inverter will have a built-in AC power outlet.Some inverters have more power outlets than others.So if you want to power some devices, you might want to splurge on a larger inverter.

It is important to know that turbines can generate electricity in many different ways.The shaft of the turbine can be rotated by taking advantage of everything from flowing water to wind.It can even be connected to a fitness bike for power generation.Use your imagination to explore innovative ways to rotate turbines and you will be rewarded with free power that you can use as you like.

Please visit my e-center if you are a foreigner.Before trying a project like this, it has the basics you should understand.This project is good for those who want to power a gadget shed or for those who start working on alternative energy sources.It is also worth mentioning that replacing the turbine in the schematic with solar panels is also possible.All you have to do is connect the positive and negative terminals on the solar panel to the positive and negative terminals of the controller.With this system, you can easily have your own small dual power plant.The results of this project are very beneficial both in education and economics.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...