Sub-station

battery power strip How to Handle Cords for a Desk in the Middle of a Room

by:KEBO      2019-11-07
Depending on the room you intend to put the table in, you can decide to put it in the center, especially if you need to allow more people to enter instead of comfortably putting it on one side of the table at the same time.This positioning may address your space and usage needs, but then it will force you to figure out how best to handle any wires needed to power the equipment on your desk.The easiest and least noticeable way to handle your desk wire located in the middle of the room is to extend the extension cord from the nearest socket to the power strip under the table, and then, you can use it to power any device on your desk.You may find an extension cord that is perfect for the distance you need it to cover, and you can put the power strip on the table at any time, which limits the fact that someone will stumble over it, the possibility of accidentally unplugging things.The really simple suggestion is to connect only the basic wires, such as those of a computer and printer, to the power strip and hide the strip under the furniture (such as a bed or chair) nearby.The carpet is a way to hide the ropes and you have no choice but to extend to the floor.You can cover the wire with a guard, which is usually a narrow rubber tube or tape that does not break the bank.This solution can prevent wire winding and limit the frequency of people tripping over the wire, but the wire protector may not be suitable for the decoration of your room.Covering these belts with carpets is the same problem as presenting them with carpet covering ropes-Wires or wire protectors create uneven spots on the carpet, which can be a danger of tripping.The design blog Unclutterer.Com it is recommended to incorporate the wires into your room decor.For example, you can install the cable on the wall and install paper flowers and leaves on the cable, which makes the wall have unique floral features.You can also connect the cable from your desk to the nearest baseboard, and then connect the wire along the baseboard to the power outlet.This solution is more decorative than functional, and you don't have to spend a long time hiding wires.The tighter the cable pulls along your floor, the less likely someone will stumble over them.Again, the less wires you run along the floor, the less invasive the wires are.If you have hardwood floors and there is space between it and your floor, or if your floor is made of wood instead of concrete, you may be able to run the wires under the floor, although you have to drill two holes in the floor, one near the table and one near the socket on the wall.You don't need to drill big holes, especially if you limit the number of wired devices you put on your desk, although they need to be at least as big as the plug on the wire.You can also run an extension cord under the floor, connected to a power strip near your desk, and you can plug the wires into it.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...