Sub-station

3 phase inverter how to rewire a 3 phase motor to a single phase | ehow

by:KEBO      2019-10-10
Industrial and commercial facilities often require threePhase Electrical system because of highThe voltage motors and machines used in this place need to use continuous AC power.Three-Due to the multiple stages they use, the phase system can provide this current.If there's only one in your storeBut you need to use three-Phase Motor, seems to have reconnected three-Phase motor for single motorThe phase system is a good idea.This is not practical, however.Instead, you can fix this by installing a converterYou can convert the phase to three-phase power.
Install the converter on or near the flat surface of the motor.Drill the mounting hole with a drill bit and insert the internal thread anchor into the hole.Hammer the anchor to bit with hammer and fixing tool and align the converter with the hole.Tighten the converter with ratchet and socket.
Run two wires from the motor to the converter, and run two more wires from the converter to the power supply.Strip the end of the wire.The input L3 on the motor goes to the output C on the converter and the input L2 goes to the output B on the converter.The input A on the converter enters the first phase of the power supply, and the input C on the converter enters the second phase of the power supply.Fix the wires to their termination point using a flat screwdriver.
Connect the ground wire from the ground screw of the power supply to the ground screw of the converter and connect the other wire from the converter to the ground screw of the motor.Fix the wires to their termination point using a flat screwdriver to complete the conversion.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...