12 volt dc to ac inverter How to Hook Up Two 12 Volt Batteries to an Electric Fence

by:KEBO      2019-11-15
Installing an electric fence around your vegetable or garden can prevent large and small pests from eating snacks or destroying it.In the hot and dry months of August and September, deer are usually the culprit of particularly bad and it is difficult to stop in other ways.Connect two 12-The volt battery parallel to the charger doubles their duration before charging with the same voltage.Turning on the controller power supply is always the last step in the installation of the electric fence.Place two 12-V battery, one in front of the other, in the closed area next to the electric fence controller.Turn the battery so that the positive and negative terminals are located on the same side, adjacent to each other.For example, place two positive terminals on the left or right.Connect the battery cable to each 12-volt battery.Tighten the terminal bolts on each battery with an adjustable wrench.Connect the second battery cable to the negative end of each battery and tighten the bolt.Check the power cord on the fence controller.Some have crocodile clips on both red and black wires, while others need to be fitted.To install the fixture on the wire, loosen the screw on the fixture with a flat surfaceHead screwdriver, insert the tip of the wire and tighten the screws on the negative (black) and positive (red) wires.Pinch the negative crocodile clip and place it on the nearest negative battery terminal and release it.Connect the positive clamp to the positive terminal on the same battery.If the fence controller has the "On" button, press it.Observe the controller.The red light flashes every few seconds, indicating that the fence is powered on.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...